電纜警示帶的探測常用的方法是電磁法。電纜警示帶內夾帶的金屬箔，在電磁場作用下的感應電流會產生二次場。可在地面上用探測儀器探測到，以確定電纜警示帶的位置。例如電磁法主動源法，信號強，定位、定深的精度高，不受臨近其他管道干擾（被查電纜警示帶需有露出點）。使用時發射機一端接被查蹤跡帶，另一端接地或接蹤跡帶另一端。探測儀通過探測蹤跡帶產生的磁感應強度的變化，確定蹤跡帶的空間位置。

The common method for detecting cable warning tape is electromagnetic method. The induced current of the metal foil carried in the cable warning belt under the action of electromagnetic field will produce a secondary field. It can be detected on the ground with a detection instrument to determine the position of the cable warning tape. For example, the active source method of electromagnetic method has strong signal, high accuracy of positioning and depth determination, and is not interfered by other nearby pipelines (the detected cable warning tape needs to be exposed). When in use, one end of the transmitter is connected to the detected track band, and the other end is grounded or connected to the other end of the track band. The detector determines the spatial position of the track belt by detecting the change of magnetic induction intensity generated by the track belt.

電纜警示帶的結構

Structure of cable warning tape

底膜與面膜、底膜與鋁箔結合牢固，并整體滾花成型。電纜警示帶印有醒目、性的警示語，不掉色、不褪色。

The bottom film and facial mask, and the bottom film and aluminum foil are firmly combined and knurled as a whole. The cable warning tape shall be printed with eye-catching and permanent warning words, which shall not fade or fade.

電纜警示帶的物理性能

Physical properties of cable warning tape

（1）電纜警示帶每卷內無接頭。

(1) There is no joint in each roll of cable warning tape.

（2）電纜警示帶兩層塑料薄膜的剝離強度應大于0.10N/mm（拉伸速度25mm/min）。

(2) The peel strength of the two layers of plastic film of the cable warning tape shall be greater than 0.10N/mm (tensile speed 25mm/min).

（3）每卷電纜警示帶應通電導通，電阻小于20Ω/100m（用歐姆表檢測）。

(3) Each reel of cable warning tape shall be powered on and the resistance shall be less than 20 Ω/100m (measured with ohmmeter).

（4）電纜警示帶的延伸率≥25％。

(4) The elongation of cable warning tape is ≥ 25%.

電纜警示帶的結構與物理性能相關內容就講解到這里了，您對此有怎樣的疑惑或者需求，可以隨時來我們網站http://m.victorkingsen.com留言中咨詢或者電話聯系！

The structure and physical performance of the cable warning tape will be explained here. If you have any doubts or needs about it, please come to our website at any time http://m.victorkingsen.com Consultation or telephone contact in the message!